| If you are looking to give your boat the ultimate | | | | However, if you get hold of a decent professional |
| protection, there is nothing better than the gel | | | | who takes the responsibility of giving a new look |
| coat. It is used in order to keep the original | | | | and a new attitude to your old boat, you can be |
| surface of cars, trucks and other vehicles as | | | | rest assured that the end result will be great. |
| good as new. Everybody has seen boats in | | | | The fiberglass material needs to be treated in a |
| terrible conditions. There are many boats that | | | | special manner and made to go through a |
| have been neglected for years and look like | | | | chemical reaction that will finally give you the end |
| wooden carcasses. In order to make a boat look | | | | product. The fiberglass is one of the best |
| good and perform well, you need to get the help | | | | materials to use for making your boat look and |
| of a professional who will ensure that your boat | | | | feel like a new one. |
| gets the right kind of look to match its power | | | | If you are utterly confused about what function |
| packed performance. | | | | the polymers have in this entire process, let us |
| Ways to make your boat look sparkling new: | | | | try and make things a bit easier. Polymers are |
| The first thing required for giving the boat a great | | | | special kinds of plastic that are used along with |
| look is to determine the level of oxidation. Once | | | | fibers in order to make something stronger. The |
| you understand that, you have to put the gel | | | | polymers are compounded with the fibers in order |
| coat to good use. The gel coat is the ideal thing | | | | to make the surface of your boat stronger and |
| for boat surfaces because it is much more | | | | more weather resistant. |
| durable than normal paint. | | | | Applying the gel coat |
| Another thing that you can do is use fiberglass | | | | With all this done, we come back once again to |
| hulls instead of the wooden variety. The fiberglass | | | | the gel coat. The gel coat is the outermost shiny |
| hulls are in vogue because they look better and at | | | | layer that will adorn the hull of your boat. The gel |
| the same time are much stronger. | | | | coat has to be applied with a lot of care. The first |
| If you are bent on rejuvenating an old boat, you | | | | coat needs to be given when the boat is being |
| have to incorporate the basic changes at first. | | | | built. This needs to be followed up by the second |
| Start with the hull and then move on to the other | | | | coat. The first layer should ideally be around a half |
| parts. | | | | centimeter thick. This layer is made by mixing the |
| Most hulls are made from glass reinforced plastic. | | | | resin and the polymer. These two materials are |
| However, this material enhances the levels of | | | | linked together and then sprayed on the surface |
| confusion for a layman because different | | | | of the boat. |
| individuals call this material by different names! | | | | |